Category Archives: Electric Winch

CP-750T

  • CP-750T

CP-750T

  • Lightweight and compact design for easy installation
  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Enclosed drum flange to prevent rope becoming trapped between drum and support castings
  • Cast steel foot mountings
  • Quiet running
  • Rated capacity limiter limits driving power of the motor to prevent overloading of the winch
  • Low voltage control ass’y comes as standard
  • Emergency stop function switch is available upon request

Specification/Part Numbers

  • Lifting capacity: 750 kg at wire rope top layer
  • Lifting speed: 10 – 15 m/min
  • Power source: 3 phase, 380-440V
  • Motor rating IP54: 2.2 kw x 4 poles induction brake motor
  • Gear ratio: 58:1
  • Maximum lifting height: 58 m
  • Braking methods: Electromagnetic
  • Wire rope: 9 mm x 60 m
  • Drum length: 240 mm
  • Drum dia.: 114 mm
  • Drum flange dia.: 240 mm
  • Mounting bolts pattern: 300 mm x 400 mm
  • Net weight, kg (standard version) : 135 kg
  • Gross weight : 165 kg
  • Body dimension, (L x D x H) : 870 x 424 x 360 mm
  • Box dimension, (L x D x H) : 970 x 530 x 520 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%

 

Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min
 Total Rope on the Drum, m
1st
1,188
10
 9.9
2nd
1,036
11
 21.3
3rd
920
12.4
 34.2
4th
826
13.8
 48.5
5th
750
15
 60

Note:.Above performance ratings are based on 50Hz supply.

 

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CP-750T
5,500
3,000
2,200
1,500
1,200
 1,000

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Accessory:

Standard Accessories  Option Accessories
  • Wire rope 9mm x 60 m with safety-latch hook
  • Low voltage control ass’y LV-320
    – Remote control, CPB-161
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch CPB-161
    – Low voltage control, LV-320
  • Base plate
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

Download

CP-750T-LV Operation Manual

2014-08-11

PDF, 0.21 MB

Download

CP-750T-LV-ES Operation Manual

2013-08-23

PDF, 0.38 MB

Download

CP-750T-ES Operation Manual

2014-08-11

PDF, 0.21 MB

Download

CP-750T Operation Manual

2013-08-23

PDF, 0.38 MB

Download

CP-500T

  • CP-500T

CP-500T

  • Lightweight and compact design for easy installation
  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Enclosed drum flange to prevent rope becoming trapped between drum and support steel plates
  • Steel plate foot mountings
  • Quiet running
  • Emergency stop function switch is available upon request
  • Low voltage control ass’y is available upon request

Specification/Part Numbers

  • Lifting capacity: 500 kg at wire rope top layer
  • Lifting speed: 12 – 18 m/min
  • Power source: 3 phase, 380-440V
  • Motor rating IP44: 1.8 kw x 4 poles induction brake motor
  • Gear ratio: 42:1
  • Maximum lifting height: 58 m
  • Braking methods: Electromagnetic
  • Wire rope: 7 mm x 60 m
  • Drum length: 220 mm
  • Drum dia.: 102 mm
  • Drum flange dia.: 180 mm
  • Mounting bolts pattern: 267 mm x 156 mm
  • Net weight, kg (standard version) : 54 kg
  • Gross weight : 56 kg
  • Body dimension, (L x D x H) : 704 x 260 x 299 mm
  • Box dimension, (L x D x H) : 740 x 280 x 350 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%

Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min
 Total Rope on the Drum, m
1st
757
12
 10
2nd
671
13.4
 22
3rd
602
14.9
 35
4th
546
16.4
 50
5th
500
18
 60

Note:.Above performance ratings are based on 50Hz supply.

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CP-500T
3,700
2,000
1,500
1,000
800
 700

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Accessory:

Standard Accessories  Option Accessories
  • Wire rope 7 mm x 60 m
  • Weight hook, CHW-0005
  • Remote control, CPB-213
    – Switch cord 3.5 mm2 x 5C x 6 m
    – Pendant switch CPB-213
  •  Remote Control, PB-331
    – Switch cord 3.5 mm2 x 5C x 6 m
    – Pendant switch PB-331 w/an emergency stop button
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320
  • Low voltage control ass’y LV-320
    – Remote control, CPB-161
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch CPB-161
    – Low voltage control, LV-320

Download

CP-500T-ES Operation Manual

2014-08-11

PDF, 0.87 MB

Download

CP-500T-LV Operation Manual

2014-08-11

PDF, 0.22 MB

Download

CP-500T Operation Manual

2014-08-11

PDF, 0.31 MB

Download

CP-500T-LV-ES Operation Manual

2014-08-11

PDF, 0.23 MB

Download

CP-500

  • CP-500

CP-500

  • Lightweight and compact design for easy installation
  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Enclosed drum flange to prevent rope becoming trapped between drum and support steel plates
  • Steel plate foot mountings
  • Quiet running
  • Emergency stop function switch is available upon request
  • Low voltage control ass’y is available upon request

Specification/Part Numbers

  • Lifting capacity: 500 kg at wire rope top layer
  • Lifting speed: 10 – 15 m/min
  • Power source: 1 phase, 220-240V
  • Motor rating IP44: 1.8 kw x 4 poles induction brake motor
  • Gear ratio: 48:1
  • Maximum lifting height: 58 m
  • Braking methods: Electromagnetic
  • Wire rope: 7 mm x 60 m
  • Drum length: 220 mm
  • Drum dia.: 102 mm
  • Drum flange dia.: 180 mm
  • Mounting bolts pattern: 267 mm x 156 mm
  • Net weight, kg (standard version) : 55 kg
  • Gross weight : 57 kg
  • Body dimension, (L x D x H) : 720 x 260 x 299 mm
  • Box dimension, (L x D x H) : 740 x 280 x 350 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%

Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min
 Total Rope on the Drum, m
1st
757
10
 10
2nd
671
11.6
 22
3rd
602
12.9
 35
4th
546
14.2
 50
5th
500
15
 60

Note:.Above performance ratings are based on 50Hz supply.

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CP-500
3,700
2,000
1,500
1,000
800
 700

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Accessory:

Standard Accessories  Option Accessories
  • Wire rope 7 mm x 60 m
  • Weight hook, CHW-0005
  • Remote control, CPB-213
    – Switch cord 3.5 mm2 x 5C x 6 m
    – Pendant switch CPB-213
  •  Remote Control, PB-331
    – Switch cord 3.5 mm2 x 5C x 6 m
    – Pendant switch PB-331 w/an emergency stop button
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

Download

CP-500-LV-ES Operation Manual

2014-08-11

PDF, 0.22 MB

 

Download

CP-500-ES Operation Manual

2014-08-11

PDF, 0.18 MB

Download

CP-500 Operation Manual

2014-08-11

PDF, 0.21 MB

Download

CP-300

  • CP-300

CP-300

  • Positive retention of wire rope on to drum
  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Enclosed drum flanges to prevent rope becoming trapped between drum and support steel plates
  • Quiet running
  • Emergency stop function switch is available upon request
  • Low voltage control ass’y is available upon request

Specification/Part Numbers

  • Lifting capacity: 300 kg at wire rope top layer
  • Lifting speed: 10 – 15 m/min
  • Power source: 1 phase, 110V or 220-240V
  • Motor rating IP44: 1.1 kw x 4 poles induction brake motor
  • Gear ratio: 43:1
  • Maximum lifting height: 29 m
  • Braking methods: Electromagnetic
  • Wire rope: 6 mm x 30 m
  • Drum length: 110 mm
  • Drum dia.: 94 mm
  • Drum flange dia.: 154 mm
  • Mounting bolts pattern: 142 mm x 142 mm
  • Net weight, kg (standard version) : 38 kg
  • Gross weight : 40 kg
  • Body dimension, (L x D x H) : 548.5 x 210 x 241 mm
  • Box dimension, (L x D x H) : 650 x 286 x 285 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%

 Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min
 Total Rope on the Drum, m
1st
444
10
 5.4
2nd
396
11.3
 11.5
3rd
358
12.5
  18.3
4th
327
13.8
  25.7
5th
300
15
 30

Note:.Above performance ratings are based on 50Hz supply.

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CP-300
2,250
1,200
900
600
500
 400

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Accessory:

Standard Accessories  Option Accessories
  • Wire rope 6 mm x 30 m
  • Weight hook, CHW-0031
  • Power lead 1.5mm2 x 3C x 3 mm and industry plug
  • Remote control, CPB-213
    – Switch cord 1.25 mm2 x 5C x 3m
    – Pendant switch CPB-213
  •  Remote Control, PB-331
    – Switch cord 1.25 mm2 x 5C x 3m
    – Pendant switch PB-331 w/an emergency stop button
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

Download

CP-300-LV-ES Operation Manual

2016-06-01

PDF, 0.21 MB

Download

CP-300 Operation Manual

2016-06-01

PDF, 0.80 MB

Download

CP-250

  • CP-250

CP-250

  • Positive retention of wire rope on to drum
  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Enclosed drum flanges to prevent rope becoming trapped between drum and support steel plates
  • Quiet running
  • Emergency stop function switch is available upon request
  • Low voltage control ass’y is available upon request

Specification/Part Numbers

  • Lifting capacity: 250 kg at wire rope top layer
  • Lifting speed: 10 – 15 m/min
  • Power source: 1 phase, 110V or 220-240V
  • Motor rating IP44: 0.75 kw x 4 poles induction brake motor
  • Gear ratio: 43:1
  • Maximum lifting height: 29 m
  • Braking methods: Electromagnetic
  • Wire rope: 6 mm x 30 m
  • Drum length: 110 mm
  • Drum dia.: 94 mm
  • Drum flange dia.: 154 mm
  • Mounting bolts pattern: 142 mm x 142 mm
  • Net weight, kg (standard version) : 34 kg
  • Gross weight : 36 kg
  • Body dimension, (L x D x H) : 525 x 210 x 241 mm
  • Box dimension, (L x D x H) : 630 x 286 x 285 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%

 Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min
 Total Rope on the Drum, m
1st
370
10
 5.4
2nd
330
11.3
 11.5
3rd
298
12.5
  18.3
4th
272
13.8
  25.7
5th
250
15
 30

Note:.Above performance ratings are based on 50Hz supply.

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CP-250
1,850
1,000
750
500
400
 350

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Accessory:

Standard Accessories  Option Accessories
  • Wire rope 6 mm x 30 m
  • Weight hook, CHW-0031
  • Power lead 1.5mm2 x 3C x 3 mm and industry plug
  • Remote control, CPB-213
    – Switch cord 1.25 mm2 x 5C x 3m
    – Pendant switch CPB-213
  •  Remote Control, PB-331
    – Switch cord 1.25 mm2 x 5C x 3m
    – Pendant switch PB-331 w/an emergency stop button
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

Download

CP-250-LV-ES Operation Manual

2016-06-01

PDF, 0.21 MB

Download

CP-250 Operation Manual

2016-06-01

PDF, 0.80 MB

Download

CP-200

  • CP-200 1

CP-200

  • Positive retention of wire rope on to drum
  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Enclosed drum flanges to prevent rope becoming trapped between drum and support steel plates
  • Quiet running
  • Emergency stop function switch is available upon request
  • Low voltage control ass’y is available upon request

Specification/Part Numbers

  • Lifting capacity: 200 kg at wire rope top layer
  • Lifting speed: 10 – 15 m/min
  • Power source: 1 phase, 110V or 220-240V
  • Motor rating IP44: 0.6 kw x 4 poles induction brake motor
  • Gear ratio: 43:1
  • Maximum lifting height: 29 m
  • Braking methods: Electromagnetic
  • Wire rope: 6 mm x 30 m
  • Drum length: 110 mm
  • Drum dia.: 94 mm
  • Drum flange dia.: 154 mm
  • Mounting bolts pattern: 142 mm x 142 mm
  • Net weight, kg (standard version) : 32 kg
  • Gross weight : 34 kg
  • Body dimension, (L x D x H) : 489 x 210 x 241 mm
  • Box dimension, (L x D x H) : 610 x 286 x 285 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%

 

Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min
 Total Rope on the Drum, m
1st
296
10
 5.4
2nd
264
11.3
 11.5
3rd
239
12.5
  18.3
4th
218
13.8
  25.7
5th
200
15
 30

Note:
1.Above performance ratings are based on 50Hz supply.

 

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CP-200
1,500
800
600
400
320
 280

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Accessory:

Standard Accessories  Option Accessories
  • Wire rope 6 mm x 30 m
  • Weight hook, CHW-0031
  • Power lead 1.5mm2 x 3C x 3 mm and industry plug
  • Remote control, CPB-213
    – Switch cord 1.25 mm2 x 5C x 3m
    – Pendant switch CPB-213
  •  Remote Control, PB-331
    – Switch cord 1.25 mm2 x 5C x 3m
    – Pendant switch PB-331 w/an emergency stop button
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

Download

CP-200-LV-ES Operation Manual

CP-200 Operation Manual

2014-08-11

2016-06-01

PDF, 0.20 MB

PDF, 0.79 MB

Download
Download

WT-180

  • WT-180
  • WT-180 1
  • WT-180 2
  • WT-180 3

WT-180

  • Lightweight and compact design for wind energy turbines for efficient and economical operation at great heights
  • A standard lifting height of up to 100 meters and high lifting speed are perfect guarantee efficient operation.
  • Extreme high duty cycle 40%ED, 2m FEM classification, 240 times of start per hour
  • Emergency stop and up and down limits functions come as standard
  • 24 VAC control for safety operation
  • All electric components, up and down limits protection, and brake are compliant to CE and VED requirements

Specification/Part Numbers

  • Lifting capacity: 180 kg at wire rope top layer
  • FEM classification: 2 m, 240 times starts/per hour, 40% duty cycle
  • Power source: 50Hz, 3 phase, 380/400/415/440V
  • Lifting speed: 17 – 23 m/min
  • Motor: 0.75 kw x 4 poles induction brake motor at IP 55 and F class ratings
  • Gear ratio: 2 stages planetary gear, 36:1
  • Maximum lifting height: 98 m
  • Brake (Integrated in motor): 230V DC electromagnetic failsafe brake
  • Drum length: 185 mm
  • Drum dia.: 120 mm
  • Drum flange dia.: 185 mm
  • Control: 24 VDC low voltage control
  • Remote control: An emergency stop switch and 3 meter cord
  • Limits protection: Up and Down limits protection
  • Wire rope: 5 mm x 100 m untwisted w/weight hook
  • Mounting bolts pattern: 350 mm x 220 mm
  • Net weight, kg (standard version) : 55 kg
  • Gross weight : 60 kg
  • Body dimension, (L x D x H) : 696 x 463.5 x 284.5 mm
  • Box dimension, (L x D x H) : 728 x 498 x 304 mmCompliant with EN 14492-2 requirements for hoisting application:
    The working coefficient for the first rope layer on the drum shall be at least 5.
    The D/d ratio to the center of the rope shall be at least 15 for the drum.
    A switch with an emergency stop and limits functions are requested
    Low voltage control is requested

 Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min
 Total Rope on the Drum, m
1st
252
17
 14.5
2nd
233.3
18.3
 30.2
3rd
217.2
19.7
  47.1
4th
203.2
21
  65.1
5rd
190.2
22.4
  84.3
6th
180
23
  100

Note:
1.Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Accessory:

Standard Accessories
  • Wire rope 5 mm x 100 m untwisted
  • Weight hook w/safety latch, CHW-0033
  • Suspension plate
  • Low voltage control ass’y LV-320
    – Remote Control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

Download

WT-180 Operation Manual

2013-08-07

PDF, 0.24 MB

Download