CWG-34000

CWG-34000

  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Cast steel foot mountings
  • Fabricated steel drum
  • Supplied on steel base plate ready to mount
  • Rated capacity limiter limits driving power of the motor to prevent overloading of the winch
  • Quiet running
  • Low voltage control ass’y comes as standard
  • Emergency stop function switch is available upon request
  • Lifting capacity: 5,000 kg at wire rope top layer
  • Lifting speed:
    Option A: 8 – 12.2 m/min
    Option B: 5.3 – 8 m/min
  • Power source: 3 phase, 380-440V
  • Motor rating IP54:
    Option A: 11 kw x 4 poles induction brake motor
    Option B: 7.5 kw x 6 poles induction brake motor
  • Gear ratio: 197:1
  • Maximum lifting height: 192 m
  • Braking methods: Electromagnetic
  • Wire rope: 22.4 mm x 200 m
  • Drum length: 680 mm
  • Drum dia.: 324 mm
  • Drum flange dia.: 570 mm
  • Mounting bolts pattern: 920 mm x 680 mm
  • Net weight, kg (standard version) : 1,380 kg
  • Gross weight : 1,545 kg
  • Body dimension, (L x D x H) : 1,860 x 740 x 905 mm
  • Box dimension, (L x D x H) : 2,040 x 840 x 1,100 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%


Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m / min
Total Rope on the Drum, m
A
B
1st
7,587
8
5.3
32
2nd
6,718
9.1
5.9
68
3rd
6,028
10.1
6.6
108
4th
5,466
11.1
7.3
153
5th
5,000
12.2
8
200

Note:.Above performance ratings are based on 50Hz supply.

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CWG-34000
35,000
20,000
15,000
10,000
8,000
7,000

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Standard Accessories  Option Accessories
  • Wire rope 22.4 mm x 200 m with safety-latch hook
  • Low voltage control ass’y LV-360
    – Remote control, CPB-161
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch CPB-161
    – Low voltage control, LV-360
  • Base Plate
  • Low voltage control ass’y LV-360
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-360

CWG-34000-ES Operation Manual

2013-08-23

PDF, 0.43 MB

CWG-34000 Operation Manual

2013-08-23

PDF, 0.42 MB

CWG-31500

CWG-31500

  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Cast steel foot mountings
  • Fabricated steel drum
  • Supplied on steel base plate ready to mount
  • Rated capacity limiter limits driving power of the motor to prevent overloading of the winch
  • Quiet running
  • Low voltage control ass’y comes as standard
  • Emergency stop function switch is available upon request
  • Lifting capacity: 3,500 kg at wire rope top layer
  • Lifting speed:
    Option A: 5.8 – 8 m/min
    Option B: 4.4 – 6 m/min
  • Power source: 3 phase, 380-440V
  • Motor rating IP54:
    Option A: 5.5 kw x 6 poles induction brake motor
    Option B: 3.8 kw x 8 poles induction brake motor
  • Gear ratio: 192:1
  • Maximum lifting height: 144 m
  • Braking methods: Electromagnetic
  • Wire rope: 18 mm x 150 m
  • Drum length: 405 mm
  • Drum dia.: 356 mm
  • Drum flange dia.: 570 mm
  • Mounting bolts pattern: 847 mm x 680 mm
  • Net weight, kg (standard version) : 800 kg
  • Gross weight : 870 kg
  • Body dimension, (L x D x H) : 1,439 x 740 x 860 mm
  • Box dimension, (L x D x H) : 1,590 x 840 x 1,020 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%


Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m / min
Total Rope on the Drum, m
A
B
1st
4,848
5.8
4.4
25
2nd
4,422
6.4
4.8
53
3rd
4,065
6.9
65.2
83
4th
3,761
7.5
5.6
116
5th
3,500
8
6
150

Note:.Above performance ratings are based on 50Hz supply.

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CWG-31500
24,500
14,000
10,500
7,000
5,500
5,000

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Standard Accessories  Option Accessories
  • Wire rope 18 mm x 150 m with safety-latch hook
  • Low voltage control ass’y LV-320
    – Remote control, CPB-161
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch CPB-161
    – Low voltage control, LV-320
  • Base Plate
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

CWG-31500-ES Operation Manual

2014-08-11

PDF, 0.42 MB

CWG-31500 Operation Manual

2014-08-11

PDF, 0.40 MB

CWG-30750

CWG-30750

  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Cast steel foot mountings
  • Fabricated steel drum
  • Supplied on steel base plate ready to mount
  • Rated capacity limiter limits driving power of the motor to prevent overloading of the winch
  • Quiet running
  • Low voltage control ass’y comes as standard
  • Emergency stop function switch is available upon request
  • Lifting capacity: 2,200 kg at wire rope top layer
  • Lifting speed:
    Option A: 6.9 – 12.6 m/min
    Option B: 4.5 – 8.3 m/min
  • Power source: 3 phase, 380-440V
  • Motor rating IP54:
    Option A: 5.5 kw x 4 poles induction brake motor
    Option B: 3.8 kw x 6 poles induction brake motor
  • Gear ratio: 127:1
  • Maximum lifting height: 97 m
  • Braking methods: Electromagnetic
  • Wire rope: 16 mm x 100 m
  • Drum length: 312 mm
  • Drum dia.: 178 mm
  • Drum flange dia.: 410 mm
  • Mounting bolts pattern: 600 mm x 499 mm
  • Net weight, kg (standard version) : 400 kg
  • Gross weight : 445 kg
  • Body dimension, (L x D x H) : 1,246 x 565 x 658 mm
  • Box dimension, (L x D x H) : 1,390 x 710 x 830 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%


Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m / min
Total Rope on the Drum, m
A
B
1st
4,014
6.9
4.5
11
2nd
3,446
8.1
5.3
24
3rd
3,019
9.2
6
39
4th
2,686
10.4
6.8
56
5th
2,419
11.5
7.5
75
6th
2,200
12.6
8.3
100

Note:.Above performance ratings are based on 50Hz supply.

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CWG-30750
15,400
8,800
6,500
4,300
3,400
3,000

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Standard Accessories  Option Accessories
  • Wire rope 16 mm x 100 m with safety-latch hook
  • Low voltage control ass’y LV-320
    – Remote control, CPB-161
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch CPB-161
    – Low voltage control, LV-320
  • Base Plate
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

CWG-30750-ES Operation Manual

2014-08-11

PDF, 0.40 MB

CWG-30750 Operation Manual

2014-08-11

PDF, 0.39 MB

CWG-30565

CWG-30565

  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Cast steel foot mountings
  • Fabricated steel drum
  • Supplied on steel base plate ready to mount
  • Rated capacity limiter limits driving power of the motor to prevent overloading of the winch
  • Quiet running
  • Low voltage control ass’y comes as standard
  • Emergency stop function switch is available upon request
  • Lifting capacity: 1,100 kg at wire rope top layer
  • Lifting speed:
    Option A: 14 – 25 m/min
    Option B: 9.2 – 16.4 m/min
  • Power source: 3 phase, 380-440V
  • Motor rating IP54:
    Option A: 5.5 kw x 4 poles induction brake motor
    Option B: 3.8 kw x 6 poles induction brake motor
  • Gear ratio: 50:1
  • Maximum lifting height: 97 m
  • Braking methods: Electromagnetic
  • Wire rope: 12 mm x 100 m
  • Drum length: 312 mm
  • Drum dia.: 140 mm
  • Drum flange dia.: 320 mm
  • Mounting bolts pattern: 620 mm x 425 mm
  • Net weight, kg (standard version) : 250 kg
  • Gross weight : 285 kg
  • Body dimension, (L x D x H) : 1,120 x 470 x 520 mm
  • Box dimension, (L x D x H) : 1,290 x 650 x 680 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%


Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m / min
Total Rope on the Drum, m
A
B
1st
1,968
14
9.2
12
2nd
1,700
16.2
10.6
26
3rd
1,496
18.4
12.1
42
4th
1,336
20.6
13.5
59
5th
1,207
22.8
15
79
6th
1,100
25
16.4
100

Note:.Above performance ratings are based on 50Hz supply.

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CWG-30565
7,700
4,400
3,250
2,150
1,700
1,600

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Standard Accessories  Option Accessories
  • Wire rope 12 mm x 100 m with safety-latch hook
  • Low voltage control ass’y LV-320
    – Remote control, CPB-161
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch CPB-161
    – Low voltage control, LV-320
  • Base Plate
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

CWG-30565-ES Operation Manual

2014-08-11

PDF, 0.40 MB

CWG-30565 Operation Manual

2014-08-11

PDF, 0.40 MB

CWG-30375

CWG-30375

  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Cast steel foot mountings
  • Fabricated steel drum
  • Supplied on steel base plate ready to mount
  • Rated capacity limiter limits driving power of the motor to prevent overloading of the winch
  • Quiet running
  • Low voltage control ass’y comes as standard
  • Emergency stop function switch is available upon request
  • Lifting capacity: 900 kg at wire rope top layer
  • Lifting speed:
    Option A: 13 – 20.6 m/min
    Option B: 8.5 – 13.5 m/min
  • Power source: 3 phase, 380-440V
  • Motor rating IP54:
    Option A: 3.8 kw x 4 poles induction brake motor
    Option B: 2.2 kw x 6 poles induction brake motor
  • Gear ratio: 48:1
  • Maximum lifting height: 58 m
  • Braking methods: Electromagnetic
  • Wire rope: 10 mm x 60 m
  • Drum length: 230 mm
  • Drum dia.: 127 mm
  • Drum flange dia.: 275 mm
  • Mounting bolts pattern: 500 mm x 370 mm
  • Net weight, kg (standard version) : 185 kg
  • Gross weight : 225 kg
  • Body dimension, (L x D x H) : 974 x 400 x 445 mm
  • Box dimension, (L x D x H) : 1,140 x 590 x 620 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%


Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m / min
Total Rope on the Drum, m
A
B
1st
1,426
13
8.5
10
2nd
1,244
14.9
9.8
20
3rd
1,103
16.8
11
33
4th
991
18.7
12.2
46
5th
900
20.6
13.5
60

Note:.Above performance ratings are based on 50Hz supply.

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CWG-30375
6,300
3,600
2,670
1,770
1,400
1,200

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Standard Accessories  Option Accessories
  • Wire rope 10 mm x 60 m with safety-latch hook
  • Low voltage control ass’y LV-320
    – Remote control, CPB-161
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch CPB-161
    – Low voltage control, LV-320
  • Base plate
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

CWG-30375-ES Operation Manual

2014-08-11

PDF, 0.40 MB

CWG-30375 Operation Manual

2014-08-11

PDF, 0.41 MB

CWG-30151

CWG-30151

  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Enclosed drum flange to prevent rope becoming trapped between drum and support castings
  • Cast steel foot mountings
  • Fabricated steel drum
  • Supplied on steel base plate ready to mount
  • Quiet running
  • Emergency stop function switch is available upon request
  • Low voltage control ass’y is available upon request
  • Lifting capacity: 500 kg at wire rope top layer
  • Lifting speed: 12 – 18 m/min
  • Power source: 3 phase, 380-440V
  • Motor rating IP44: 1.5 kw x 4 poles induction brake motor
  • Gear ratio: 57:1
  • Maximum lifting height: 58 m
  • Braking methods: Electromagnetic
  • Wire rope: 9 mm x 60 m
  • Drum length: 240 mm
  • Drum dia.: 140 mm
  • Drum flange dia.: 280 mm
  • Mounting bolts pattern: 400 mm x 325 mm
  • Net weight, kg (standard version) : 120 kg
  • Gross weight : 148 kg
  • Body dimension, (L x D x H) : 922 x 367 x 425 mm
  • Box dimension, (L x D x H) : 1,090 x 470 x 590 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%


Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min
Total Rope on the Drum, m
1st
742
12
12
2nd
662
13.3
26
3rd
597
14.8
40
4th
544
16.2
57
5th
500
18
60

Note:.Above performance ratings are based on 50Hz supply.

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CWG-30151
3,700
2,000
1,500
1,000
800
700

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Standard Accessories  Option Accessories
  • Wire rope 9 mm x 60 m
  • Weight hook CHW-0005
  • Remote control, CPB-213
    * Switch cord 2.0 mm2 x 5C x 3 m
    * Pendant switch CPB-213
  • Base Plate
  • Remote control, PB-331
    * Switch cord 2.0 mm2 x 5C x 3 m
    * Pendant switch PB-331 w/an emergency stop button
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

CWG-30151-LV-ES Operation Manual

2014-08-11

PDF, 0.20 MB

CWG-30151-LV Operation Manual

2014-08-11

PDF, 0.18 MB

CWG-30151-ES Operation Manual

2014-08-11

PDF, 0.21 MB

CWG-30151 Operation Manual

2014-08-11

PDF, 0.21 MB

CWG-10151

CWG-10151

  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Enclosed drum flange to prevent rope becoming trapped between drum and support castings
  • Cast steel foot mountings
  • Fabricated steel drum
  • Supplied on steel base plate ready to mount
  • Quiet running
  • Emergency stop function switch is available upon request
  • Low voltage control ass’y is available upon request
  • Lifting capacity: 400 kg at wire rope top layer
  • Lifting speed: 12 – 18 m/min
  • Power source: 1 phase, 220-240V
  • Motor rating IP44: 1.5 kw x 4 poles induction brake motor
  • Gear ratio: 57:1
  • Maximum lifting height: 58 m
  • Braking methods: Electromagnetic
  • Wire rope: 9 mm x 60 m
  • Drum length: 240 mm
  • Drum dia.: 140 mm
  • Drum flange dia.: 280 mm
  • Mounting bolts pattern: 400 mm x 325 mm
  • Net weight, kg (standard version) : 120 kg
  • Gross weight : 148 kg
  • Body dimension, (L x D x H) : 937 x 367 x 425 mm
  • Box dimension, (L x D x H) : 1,090 x 470 x 590 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%


 

Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min
Total Rope on the Drum, m
1st
593
12
12
2nd
529
13.3
26
3rd
478
14.8
40
4th
436
16.2
57
5th
400
18
60

Note:.Above performance ratings are based on 50Hz supply.

 

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CWG-10151
3,000
1,600
1,200
800
620
550

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Standard Accessories  Option Accessories
  • Wire rope 9 mm x 60 m
  • Weight hook CHW-0005
  • Remote control, CPB-213
    * Switch cord 3.5 mm2 x 5C x 3 m
    * Pendant switch CPB-213
  • Base Plate
  • Remote control, PB-331
    * Switch cord 3.5 mm2 x 5C x 3 m
    * Pendant switch PB-331 w/an emergency stop button
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

CWG-10151-ES Operation Manual

2014-08-11

PDF, 0.19 MB

CWG-10151-LV-ES Operation Manual

2014-08-11

PDF, 0.19 MB

CWG-10151 Operation Manual

2014-08-11

PDF, 0.18 MB

CWG-30075

CWG-30075

  • Positive retention of wire rope on to drum
  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Enclosed drum flange to prevent rope becoming trapped between drum and support steel plates
  • Quiet running
  • Emergency stop function switch is available upon request
  • Low voltage control ass’y is available upon request
  • Lifting capacity: 300 kg at wire rope top layer
  • Lifting speed: 10 – 15 m/min
  • Power source: 3 phase, 380-440V
  • Motor rating IP44: 0.75 kw x 4 poles induction brake motor
  • Gear ratio: 43:1
  • Maximum lifting height: 29 m
  • Braking methods: Electromagnetic
  • Wire rope: 6 mm x 30 m
  • Drum length: 110 mm
  • Drum dia.: 94 mm
  • Drum flange dia.: 154 mm
  • Mounting bolts pattern: 142 mm x 142 mm
  • Net weight, kg (standard version) : 32 kg
  • Gross weight : 34 kg
  • Body dimension, (L x D x H) : 477 x 210 x 241 mm
  • Box dimension, (L x D x H) : 635 x 296 x 290 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%


Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min
Total Rope on the Drum, m
1st
444
10
5.4
2nd
396
11.4 11.5
3rd
358
12.5
18.3
4th
326
13.8
25.7
5th
300
15
30

Note:.Above performance ratings are based on 50Hz supply.

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CWG-30075
2,250
1,200
900
600
500
400

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Standard Accessories  Option Accessories
  • Wire rope 6 mm x 30 m
  • Weight hook CHW-0031
  • Remote control, CPB-213
    * Switch cord 1.25 mm2 x 5C x 3 m
    * Pendant switch CPB-213
  • Remote control, PB-331
    * Switch cord 1.25 mm2 x 5C x 3 m
    * Pendant switch PB-331 w/an emergency stop button
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

CWG-30075-LV-ES Operation Manual

2014-08-11

PDF, 0.23 MB

CWG-30075-ES Operation Manual

2014-08-11

PDF, 0.22 MB

CWG-30075 Operation Manual

2014-08-11

PDF, 0.20 MB

CWG-10077

CWG-10077

  • Positive retention of wire rope on to drum
  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Enclosed drum flange to prevent rope becoming trapped between drum and support steel plates
  • Quiet running
  • Emergency stop function switch is available upon request
  • Low voltage control ass’y is available upon request
  • Lifting capacity: 300 kg at wire rope top layer
  • Lifting speed: 12 – 19 m/min
  • Power source: 1 phase, 110V, 220-240V
  • Motor rating IP44: 1.5 kw x 4 poles induction brake motor
  • Gear ratio: 41:1
  • Maximum lifting height: 58 m
  • Braking methods: Electromagnetic
  • Wire rope: 6 mm x 60 m
  • Drum length: 150 mm
  • Drum dia.: 102 mm
  • Drum flange dia.: 180 mm
  • Mounting bolts pattern: 197 mm x 156 mm
  • Net weight, kg (standard version) : 42 kg
  • Gross weight : 44 kg
  • Body dimension, (L x D x H) : 624 x 252 x 300 mm
  • Box dimension, (L x D x H) : 700 x 280 x 375 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%


 

Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min
Total Rope on the Drum, m
1st
467
12
8.1
2nd
420
13.5
17.2
3rd
382
14.9
27.1
4th
350
16.2
38
5th
323
17.6
50
6th
300
19
60

Note:. Above performance ratings are based on 50Hz supply.

 

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CWG-10077
2,250
1,200
900
600
500
400

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Standard Accessories  Option Accessories
  • Wire rope 6 mm x 60 m
  • Weight hook CHW-0031
  • Remote control, CPB-213
    * Switch cord 3.5 mm2 x 5C x 3 m
    * Pendant switch CPB-213
  • Remote control, PB-331
    * Switch cord 3.5 mm2 x 5C x 3 m
    * Pendant switch PB-331 w/an emergency stop button
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

CWG-10077-LV-ES Operation Manual

2014-08-11

PDF, 0.18 MB

CWG-10077-ES Operation Manual

2014-08-11

PDF, 0.18 MB

CWG-10077 Operation Manual

2014-08-11

PDF, 0.17 MB

CWG-500TH

CWG-500TH

  • Lightweight and compact design is ideal for easy installation.
  • Electromagnetic spring-applied failsafe brake.
  • Planetary gears for maximum mechanical efficiency.
  • Cast steel foot mountings.
  • Heavy duty high efficiency ball bearings on al running surfaces
  • Enclosed drum flanges to prevent rope becoming trapped between drum and support castings
  • 24 VAC low voltage control comes as standard
  • Rated capacity limiter limits driving power of motor to prevent overloading of the winch
  • Lifting capacity: 500 kg at wire rope top layer
  • Lifting speed: 19 – 34 m/min
  • Power source: 3 phase, 380-440V
  • Motor rating IP54: 3.7 kw x 2 poles induction brake motor
  • Maximum lifting height: 127 m
  • Braking methods: Electromagnetic spring-applied failsafe brake
  • Wire rope: 8 mm x 130 m, 6 x 19, with 2,970 breaking strength
  • Drum length: 300 mm
  • Drum dia.: 114.3 mm
  • Drum flange dia.: 240 mm
  • Mounting bolts pattern: 460 mm x 300 mm
  • Net weight, kg (standard version) : 155 kg
  • Gross weight : 183 kg
  • Body dimension, (L x D x H) : 1,002 x 424 x 360 mm
  • Box dimension, (L x D x H) : 1,140 x 590 x 520 mm

Compliant with EN 14492-1 requirements :
* For hoisting application:
The working coefficient for the first rope layer on the drum shall be at least 5.
The D/d ratio to the center of the rope shall be at least 15 for the drum.
A switch with emergency stop and limit functions are requested.

* For pulling application:
The working coefficient for the first rope layer on the drum shall be at least 3.
The D/d ratio to the center of the rope shall be at least 12 for the drum.
A switch with emergency stop and limit functions are requested


 

Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min at 50Hz
Total Rope on the Drum, m
1st
893
19
14
2nd
789
22
30
3rd
707
24
48
4th
641
27
67
5th
586
29
89
6th
540
32
112
7th
500
34
130

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Standard Accessories  Option Accessories
  • Wire rope 8 mm  x 130 with safety-latch hook
  • Remote control, CPB-161
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch CPB-161
  • Low voltage control, LV-320
  • Base plate
  • Remote control, PB-306 assembly(switch with an emergency stop button)

CWG-500TH-ES Operation Manual

2013-11-04

PDF, 0.41 MB

CWG-500TH-LV Operation Manual

2014-08-11

PDF, 0.20 MB

CWG-500TH-LV-ES Operation Manual

2014-08-11

PDF, 0.21 MB