CP-500

CP-500

  • Lightweight and compact design for easy installation
  • Electromagnetic spring-applied failsafe brake
  • Heavy duty high efficiency ball bearing on all running surfaces
  • Planetary gears for maximum mechanical efficiency
  • Enclosed drum flange to prevent rope becoming trapped between drum and support steel plates
  • Steel plate foot mountings
  • Quiet running
  • Emergency stop function switch is available upon request
  • Low voltage control ass’y is available upon request
  • Lifting capacity: 500 kg at wire rope top layer
  • Lifting speed: 10 – 15 m/min
  • Power source: 1 phase, 220-240V
  • Motor rating IP44: 1.8 kw x 4 poles induction brake motor
  • Gear ratio: 48:1
  • Maximum lifting height: 58 m
  • Braking methods: Electromagnetic
  • Wire rope: 7 mm x 60 m
  • Drum length: 220 mm
  • Drum dia.: 102 mm
  • Drum flange dia.: 180 mm
  • Mounting bolts pattern: 267 mm x 156 mm
  • Net weight, kg (standard version) : 55 kg
  • Gross weight : 57 kg
  • Body dimension, (L x D x H) : 720 x 260 x 299 mm
  • Box dimension, (L x D x H) : 740 x 280 x 350 mm

Above performance ratings are based on 50Hz supply. (60Hz motor available as option resulting in a reduction of lifting capacities by 20% and a speed increase of 20%


Lifting Capacity, Lifting Speed and Rope Capacity: 

Layer of Wire rope
Lifting Capacity, kg
Lifting Speed, m/min
Total Rope on the Drum, m
1st
757
10
10
2nd
671
11.6
22
3rd
602
12.9
35
4th
546
14.2
50
5th
500
15
60

Note:.Above performance ratings are based on 50Hz supply.

Pulling Load Capacity for Various Inclines in kg 

Model
Level Surface
Gradient % inclines / angle in degrees
10% 60°
20% 11°
40% 25°
60% 31°
80% 39°
CP-500
3,700
2,000
1,500
1,000
800
700

Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)

Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Standard Accessories  Option Accessories
  • Wire rope 7 mm x 60 m
  • Weight hook, CHW-0005
  • Remote control, CPB-213
    – Switch cord 3.5 mm2 x 5C x 6 m
    – Pendant switch CPB-213
  •  Remote Control, PB-331
    – Switch cord 3.5 mm2 x 5C x 6 m
    – Pendant switch PB-331 w/an emergency stop button
  • Low voltage control ass’y LV-320
    – Remote control, PB-306
    * Switch cord 1.25 mm2 x 3C x 3m
    * Pendant switch PB-306 w/an emergency stop button
    – Low voltage control, LV-320

CP-500-LV-ES Operation Manual

2014-08-11

PDF, 0.22 MB

 

CP-500-ES Operation Manual

2014-08-11

PDF, 0.18 MB

CP-500 Operation Manual

2014-08-11

PDF, 0.21 MB

Comments are closed.