Walrus 20.0
- Waterproof and dustproof construction:
– Potted contactor and motor provide complete protection from water penetration and allow dependable operation in up to 1.8 meter of water.
– Rubber seals at motor and gear housing joints for independent water protection
– Double lip and spring seal at drum support racks
– Industrial duty remote control with twist-on connector to provide total protection from water. - Waterproof remote control with thermometric LED indicator alerts when receiving a warning signal from the motor over-heated.
- Tough aluminum die cast housings withstand strength of 2 times winch line pull at least.
- U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load without slippage.
- Part Number:PN 282020 (24V)
- Rated line pull: 9,070 kg / 20,000 lb (single line)
- Motor: 4,474 w / 6.0 hp 24V series wound
- Gear train: 3-stage planetary 343:1
- Clutch (freespooling): Rotating ring gear
- Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
- Winch construction: Aluminum die cast housings with steel drum
- Drum size:102 mm x 254 mm (4” x 10”)
- Control box: Industrial contactor is potted with epoxy resin compound
- Control: Waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
- Rope type: 6 × 29 – IWRC•
- Rope size: 12.7 mm x 25 m (1/2” x 82’)
- Degree of protection: Comply with IEC 60529 Edition 2.1:2001 IP68 rating
- Mounting bolts pattern: 304 mm x 114.3 mm (12” x 4.5”)
304 mm x 165 mm (12″ x 6.5″) - Mounting: Foot forward mounting only
- Winch weight (including rope) : 80 kg / 176.4 lb
- Gross weight : 86.1 kg / 189.8 lb
- Box dimension : 740 x 270 x 450 mm (29.1″ x 10.6″ x 15.9″)
Line Speed and Amp. Draw (1st layer of wire rope on the drum):
|
Line Pull,
kg / lb |
Line Speed,
mpm / fpm |
Amp. Draw, A
|
|
24V
|
||
|
No load
|
7.0 / 23.0
|
45
|
|
1,814 / 4,000
|
3.8 / 12.5
|
90
|
|
3,629 / 8,000
|
3.1 / 10.2
|
120
|
|
4,536 / 10,000
|
2.7 / 8.9
|
160
|
|
7,484 / 16,500
|
1.4 / 4.6
|
260
|
|
9,070 / 20,000
|
1.2 / 3.9
|
310
|
Line Pull and Rope Capacity:
|
Layer of Rope
|
Pull by layer, kg / lb
|
Total Rope on the Drum, m / ft
|
|
1st
|
9,070 / 20,000
|
7.0 / 23.0
|
|
2nd
|
7,426 / 16,372
|
15.5 / 50.9
|
|
3rd
|
6,287 / 13,860
|
25.0 / 82.0
|
Warning
•The winch is not intended to be used in any manner for the movement or lifting of personnel.
• The rated line pull shown is based on the first layer of rope on the drum.
• The rope winding on the drum shall remain 5 wraps from the drum.
Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components,
One (1) year warranty for electrical components,
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:
| Standard Accessories |
|
