Walrus 16.5
- Waterproof and dustproof construction:
– Potted contactor and motor provide complete protection from water penetration and allow dependable operation in up to 1.8 meter of water.
– Rubber seals at motor and gear housing joints for independent water protection
– Double lip and spring seal at drum support racks
– Industrial duty remote control with twist-on connector to provide total protection from water. - Waterproof remote control with thermometric LED indicator alerts when receiving a warning signal from the motor over-heated.
- Tough aluminum die cast housings withstand strength of 2 times winch line pull at least.
- U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load without slippage.
- Part number: PN 281610 (12V) / PN 281620 (24V)
- Rated line pull: 7,484 kg / 16,500 lb single line
- Motor: 4,325 w / 5.8 hp 12V series wound
2,834 w / 3.8 hp 24V series wound - Gear train: 3-stage planetary 343:1
- Clutch (freespooling): Rotating ring gear
- Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
- Winch construction: Aluminum die cast housings with steel drum
- Drum size: 89 mm x 204 mm (3.5″ x 8″)
- Control box: Industrial contactor is potted with epoxy resin compound
- Control: Waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
- Rope type: 6 × 29 – IWRC
- Rope size: 11.1 mm x 27 m (7/16” x 89’)
- Degree of protection: Comply with IEC 60529 Edition 2.1:2001 IP68 rating
- Mounting bolts pattern: 254 mm x 114.3 mm (10” x 4.5”)
254 mm x 165 mm (10″ x 6.5″) - Mounting: Foot forward mounting only
- Winch weight (including rope) : 72 kg / 158.7 lb
- Gross weight : 78 kg / 172 lb
- Box dimension, (L x D x H) : 690 x 270 x 405 mm (27.2″ x 10.6″ x 15.9″)
Line Speed and Amp. Draw (1st layer of wire rope on the drum):
|
Line Pull,
kg / lb |
Line Speed,
mpm / fpm |
Amp. Draw, A
|
|
|
12V
|
24V | ||
|
No Load
|
6.4 / 21.0
|
50
|
40 |
|
1,814 / 4,000
|
3.6 / 11.8
|
130
|
115 |
|
3,629 / 8,000
|
2.7 / 8.9
|
200
|
180 |
|
4,536 / 10,000
|
2.1 / 6.9
|
250
|
225 |
|
7,484 / 16,500
|
1.5 / 4.9
|
370
|
340 |
Line Pull and Rope Capacity:
|
Layer of Rope
|
Pull by Layer, kg / lb
|
Total Rope on the Drum, m / ft
|
|
1st
|
7,484 / 16,500
|
5.6 / 18.4
|
|
2nd
|
6,125 / 13,503
|
12.4 / 40.7
|
|
3rd
|
5,184 / 11,429
|
20.4 / 66.9
|
|
4th
|
4,494 / 9,908
|
27 / 89
|
Warning
•The winch is not intended to be used in any manner for the movement or lifting of personnel.
• The rated line pull shown is based on the first layer of rope on the drum.
• The rope winding on the drum shall remain 5 wraps from the drum.
Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components,
One (1) year warranty for electrical components,
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components,
One (1) year warranty for electrical components,
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:
| Standard Accessories |
|