Rhino 12

Rhino 12

  • Reliable electric winch for commercial, industrial and severe duty applications
  • 10 equally positioned pin holes with a ergonomic T-handle make it possible to reposition in 36 degree increments.
  • Over-load protector built-in the control box prevents overloading of the winch
  • Water-proof remote control with thermometric LED indicator alerts when the motor is over-heated.
  • U.S. Germany, U.K. France, etc patented mechanical cone brake holds full load
  • Submersible sealed contactor handles high amps and allows higher duty cycle.
  • Standard Compliance: CE Machinery Directive 2006/42/EC, CE EMC Directive 2004/108/EC, EN 14492-1:2006 Power Driven Winches and SAE J706
  • Part number: PN 851212 (12V) / PN 851224 (24V)
  • Rated line pull: 5,440 kg / 12,000 lb (SAE J706 rating)
    5,100 kg (EN 14492-1 rating)
  • Motor: 4,180 w / 5.6 hp 12V series wound
    2,690 w / 3.6 hp 24V series wound
  • Gear train: 3-stage planetary 315:1
  • Clutch (freespooling): Rotating ring gear
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 114 x 195.5 mm (4.5” x 7.7″)
  • Rotation of winch: Wire rope shall be under-wound orientation only
  • Control: Waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
  • Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
    254 x 165 mm (10″ x 6.5″)
  • Wire rope recommended: 
    * 12 mm x 21.4 m, 1,960 N/mm2 grade with a minimum breaking strength of 100.5 kN required for EN 14492-1 rating.
    * 1/2″ x 100′, EIPS grade with a minimum breaking strength of 22,552 lbf required for SAE J706 rating
  • Winch weight (including rope) : 47 kg / 104 lb
  • Gross weight : 61 kg / 134 lb
  • Box dimension, (L x D x H) : 695 x 313 x 473 mm ( 27.3″ x 12.3″ x 18.6″)Compliant with EN 14492-1 requirements for vehicle recovery winch:
    * The working coefficient for the first rope layer on the drum shall be at least 2.
    * The D/d ratio to the center of the rope shall be at least 10 for the drum.
    * Drum freeboard shall be at least 1.5 x rope diameter

Line Speed and Amp. Draw (1st layer of wire rope on the drum): 

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp. Draw, A
12V
24V
No Load
10 / 32.8
40
 35
1,814 / 4,000
4.4 / 14.4
140
110
3,630 / 8,000
3.5 / 11.5
280
 210
4,535 / 10,000
1.5 / 5
350
 260
5,440 / 12,000
1.3 / 4.3
420
 310

Line Pull and Rope Capacity:

Layer of Rope
Pull by Layer, kg / lb
Total Rope on the Drum, m / ft
1st
5,440 / 12,000
5.9 / 19.4
2nd
4,534 / 9,996
13 / 42.7
3rd
3,885 / 8,565
21.4 / 70
4th
3,399 / 7,494
30.5 / 100

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
Dimension, mm/in:

  • 10 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 36° increments.

Standard Accessories  Option Accessory
  • Detachable control box
  • Remote control w/5 m (17’) cord
  • 179 mm throat roller fairlead
  • Cable tensioner
  • Snatch block
  • Winch accessory kit

Rhino 12 (Black) Operation Manual

2014-11-05

PDF, 0.34 MB

Rhino 12 Operation Manual

2014-04-08

PDF, 0.34 MB

Comments are closed.