APE 19

  • APE 19
  • APE 19 2
  • APE 19 1

APE 19

1,900 kg Hydraulic Hoisting Winch

  • Internally lubricated for reliable power and an exceptionally long service life.
  • Compact, hardened and high efficiency gear trains reduce power loss and placed inside the drum.
  • Multi-Disc Brake (MDB) patented and two ways counter-balance valve together for holding full load.
  • The normal lifting capacity is rated at the top layer of wire rope. It always lifts its rated load no matter what layer of wire rope it is.
  • The drum is dimensioned to obtain a minimum D/d ratio of 18:1 with a 5:1 minimum safety factor at the rated load.
  • “The winch meets the requirement of FEM9.511 covering rating and classification and FEM 1001 standard for the calculation of lifting equipment.
  • Compliance with international standards such as ASME B30.7 and, CE Machinery Directive 2006/42/EC

Specification/Part Numbers

  • Part number: PN 681930 (Std. drum) / PN 681940 (Long drum)
  • Rated line lift: 1,900 kg ( 4,190 lb ) single line at the top layer of rope
  • Line speed: 46 4 mpm / 153 fpm single line at the top layer of rope
  • Motor: 200 cm3/rev ( 12.2 in3/rev )
  • Operation pressure: 205 bar ( 2,973 psi )with maximum back pressure on return line of 5 bar
  • Max-Min pump flow: 60 – 20 l/min ( 15.9 – 5.3 g/min )
  • Gear ratio: 1-stage planetary 5.8:1
  • Brake: Multi-Disc Brake (MDB) patented and counter-balance valve together
  • Winch construction: steel housings with steel drum
  • Winch Rotation: counter clockwise rotation of the drum
  • Drum size (dxDxL):
    210 x 344 x 191 mm (8.3” x 13.5” x 7.5”) for std. drum
    210 x 344 x 320 mm (8.3” x 13.5” x 12.6”) for long drum
  • Recommended wire rope:
    12 mm x 48m for std. drum and 12 mm x 82 m for long drum with 1,960 N/mm2 grade with minimum breaking strength of 100. kN for EN 14492-2 rating
    1/2” x 157 ft for std. drum and 1/2” x 269 ft for long drum with EIPS grade with minimum breaking strength of 22,487 lbf for ASME 30.7 rating
  • Mounting bolts pattern:
    290 x 196 mm ( 11.4” x 7.7”) for std. drum
    290 x 325 mm (11.4” x 112.8”) for long drum
  • Winch weight:
    81 kg / 178.6 lb (Std. drum)
    96 kg / 211.6 lb (Long drum)

Performance Data: 

Line Lift and Rope Capacity
Layer of Wire Rope
Lift by layer,
kg / lb
Total Rope on the Drum, m / ft
 Line Speed
mpm / fpm
Std. drum
 Long drum
1st
2,515 / 5,545
10.4 / 34
 18 / 59 35.0 / 11.5
2nd
2,270 / 5,004
22 / 72
 38 / 124 38.8 / 127
3rd
2,068 / 4,559
35 / 114
 60 / 195 42.6 / 140
4th
1,900 / 4,190
48 / 157
 82 / 157 46.4 / 153

*  The total rope on the drum may vary from figures stated elsewhere

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
Load Rated:
  Load and speed vary according to how much wire rope is on the drum. The first layer of rope on the drum delivers the slowest speed The total rope on the drum may vary from figures stated elsewhere and the maximum load. A full drum delivers the maximum speed and the minimum load. For this reason, all hydraulic hoisting winches are rated at their top layer of wire rope on the drum
  Leave two free layers below the top of the drum flanges to meet European lifting rules
  Leave a minimum of ½ inch ( 13 mm ) below the tope of the drum flange to meet ASME 30.7
Dimension, mm/in:

CE requirement as options:

  • Drum guard
  • Emergency stop device
  • Overload device
  • Up and Down limit protection device

Comments are closed.