Seal 12.5

Seal 12.5

  • 12V DC severe duty winch rated at 12,500 lb pulling meets or exceeds your expectations.
  • Heavy duty series wound motor delivers superior torque output and faster line speed. A motor equipped with a thermal switch
  • 4 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 90 degree Increments.
  • Hardened steel, 3-stage planetary gear train for efficient and reliable operation
  • Water-proof remote control with thermometric LED indicator alerts when receiving a warning signal from the motor upon an over-heated.
  • Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
  • U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load without slipping.
  • Part number: PN 291250
  • Rated line pull: 5,670 kg / 12,500 lb single line
  • Motor: 3,730 w / 5.0 hp 12V series wound
  • Gear train: 3-stage planetary 225:1
  • Clutch (freespooling): Rotating ring gear
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 63.5 x 227 mm (2.5” x 8.9”)
  • Control: Waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
  • Rope type: Galvanized aircraft A7 x19 wire rope
  • Rope size: 9.5 mm x 25 m (3/8” x 82’)
  • Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
  • Mounting: Foot forward mounting only
  • Winch weight (including rope) : 34.5 kg / 76 lb
  • Gross weight : 48.5 kg / 107 lb
  • Box dimension, (L x D x H) : 682 x 209 x 453 mm (26.8″ x 8.2″ x 17.8″)

Line Speed and Amp. Draw (1st layer of wire rope on the drum):

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp, Draw,  A
12V
No load
7.5 / 24.6
45
907 / 2,000
3.4 / 11.2
75
1,814 / 4,000
2.5 / 8.2
160
2,722 / 6,000
2 / 6.6
230
3,629 / 8,000
1.6 / 5.2
300
4,535/ 10,000
1.2 / 3.9
375
5,670 / 12,500
0.9 / 3
470

Line Pull and Rope Capacity:

Layer of Rope
Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st
5,670 / 12,500
5.4 / 17.7
2nd
4,499 / 9,919
12.1 / 39.7
3rd
3,729 / 8,221
20.3 / 66.6
4th
3,184 / 7,020
25 / 82

Warning
Winches are not to be used for the lifting or moving of persons.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components,
One (1) year warranty for electrical components,
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.

Dimension, mm/in:

  • 4 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 90° increments.
Standard Accessories  Option Accessories
  • Detachable control box
  • Remote control w/5 m (17’) cord
  • Wire rope w/safety hook
  • Roller fairlead
  • 1.8 m (6’) 2 gauge battery lead
  • Handsaver strap
  • Snatch block
  • Winch accessory kit
  • Wireless remote control
  • Circuit breaker
  • Recovery damper
  • Gloves

Seal Gen2 12.5 Operation Manual

2015-04-17

PDF, 0.33 MB

Seal 12.5s

Seal 12.5s

  • 12V DC severe duty winch rated at 12,500 lb pulling meets or exceeds your expectations.
  • Heavy duty series wound motor delivers superior torque output and faster line speed. A motor equipped with a thermal switch
  • 4 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 90 degree Increments.
  • Hardened steel, 3-stage planetary gear train for efficient and reliable operation
  • Water-proof remote control with thermometric LED indicator alerts when receiving a warning signal from the motor upon an over-heated.
  • Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
  • U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load without slipping.
  • Part number: PN 291260
  • Rated line pull: 5,670 kg / 12,500 lb single line
  • Motor: 3,730 w / 5.0 hp 12V series wound
  • Gear train: 3-stage planetary 225:1
  • Clutch (freespooling): Rotating ring gear
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 63.5 x 227 mm (2.5” x 8.9”)
  • Control: Waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
  • Rope type: Synthetic rope
  • Rope size: 11 mm x 25 m (7/16” x 82’)
  • Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
  • Mounting: Foot forward mounting only
  • Winch weight (including rope) : 28 kg / 61.7 lb
  • Gross weight : 40.5 kg / 89.1 lb
  • Box dimension, (L x D x H) : 682 x 209 x 453 mm (26.8″ x 8.2″ x 17.8″)

Line Speed and Amp. Draw (1st layer of rope on the drum):

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp, Draw,  A
12V
No load
7.5 / 24.6
45
907 / 2,000
3.4 / 11.2
75
1,814 / 4,000
2.5 / 8.2
160
2,722 / 6,000
2 / 6.6
230
3,629 / 8,000
1.6 / 5.2
300
4,535/ 10,000
1.2 / 3.9
375
5,670 / 12,500
0.9 / 3
470

Line Pull and Rope Capacity:

Layer of Rope
Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st
5,670 / 12,500
5.4 / 17.7
2nd
4,499 / 9,919
12.1 / 39.7
3rd
3,729 / 8,221
20.3 / 66.6
4th
3,184 / 7,020
25 / 82

Warning
Winches are not to be used for the lifting or moving of persons.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 10 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components,
One (1) year warranty for electrical components,
SYNTHETIC ROPES ARE NOT INCLUDED UNDER WARRANTY.

Dimension, mm/in:

  • 4 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 90° increments.
Standard Accessories  Option Accessories
  • Detachable control box
  • Remote control w/5 m (17’) cord
  • Synthetic rope w/clevis hook
  • Hawse fairlead
  • 1.8 m (6’) 2 gauge battery lead
  • Handsaver strap
  •  Snatch block
  • Winch accessory kit
  • Wireless remote control
  • Circuit breaker
  • Recovery damper
  • Gloves

Seal Gen2 12.5s Operation Manual

2015-04-17

PDF, 0.33 MB

Seal 12.5rs

Seal 12.5rs

  • 12V DC severe duty winch rated at 12,500 lb pulling meets or exceeds your expectations.
  • Heavy duty series wound motor delivers superior torque output and faster line speed. A motor equipped with a thermal switch
  • 4 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 90 degree Increments.
  • Hardened steel, 3-stage planetary gear train for efficient and reliable operation
  • Water-proof remote control with thermometric LED indicator alerts when receiving a warning signal from the motor upon an over-heated.
  • Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
  • U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load without slipping.
  • Part number: PN 291270
  • Rated line pull: 5,670 kg / 12,500 lb single line
  • Motor: 3,730 w / 5.0 hp 12V series wound
  • Gear train: 3-stage planetary 225:1
  • Clutch (freespooling): Rotating ring gear
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 63.5 x 227 mm (2.5” x 8.9”)
  • Control: Both built-in digital signal two ways wireless remote control and waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
  • Rope type: Synthetic rope
  • Rope size: 11 mm x 25 m (7/16” x 82’)
  • Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
  • Mounting: Foot forward mounting only
  • Winch weight (including rope) : 28 kg / 61.7 lb
  • Gross weight : 40.5 kg / 89.1 lb
  • Box dimension, (L x D x H) : 682 x 209 x 453 mm (26.8″ x 8.2″ x 17.8″)

Line Speed and Amp. Draw (1st layer of rope on the drum):

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp, Draw,  A
12V
No load
7.5 / 24.6
45
907 / 2,000
3.4 / 11.2
75
1,814 / 4,000
2.5 / 8.2
160
2,722 / 6,000
2 / 6.6
230
3,629 / 8,000
1.6 / 5.2
300
4,535/ 10,000
1.2 / 3.9
375
5,670 / 12,500
0.9 / 3
470

Line Pull and Rope Capacity:

Layer of Rope
Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st
5,670 / 12,500
5.4 / 17.7
2nd
4,499 / 9,919
12.1 / 39.7
3rd
3,729 / 8,221
20.3 / 66.6
4th
3,184 / 7,020
25 / 82

Warning
Winches are not to be used for the lifting or moving of persons.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 10 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components,
One (1) year warranty for electrical components,
SYNTHETIC ROPES ARE NOT INCLUDED UNDER WARRANTY.

Dimension, mm/in:

  • 4 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 90° increments.
Standard Accessories  Option Accessories
  • Detachable control box
  • Remote control w/5 m (17’) cord
  • Built-in wireless remote control
  • Synthetic rope w/clevis hook
  • Hawse fairlead
  • 1.8 m (6’) 2 gauge battery lead
  • Handsaver strap
  • Snatch block
  • Winch accessory kit
  • Circuit breaker
  • Recovery damper
  • Gloves

Seal Gen2 12.5rs Operation Manual

2015-04-17

PDF, 0.32 MB

Seal Gen2 9.5

Seal Gen2 9.5

  • 12V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations.
  • Heavy duty series wound motor equipped with thermal switch alters when motor over-heating.
  • 16 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 22.5 degree increments.
  • Water-proof remote control with thermometric LED indicator w/5 m cord
  • Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
  • The U.S. Germany, U.K. France, etc patented mechanical cone brake outside the drum expedites heat dispersion. The greater the load on the rope, the greater amount of braking is generated by the mechanism.
  • Meet SAE J706, CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.
  • Part number: PN 295950
  • Rated line pull: 4,309 kg / 9,500 lb single line
  • Motor: 3,730 w / 5.0 hp 12V series wound
  • Gear ratio: 3-stage planetary 159:1
  • Clutch (freespooling): Rotating ring gear
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 63.5 x 227 x 273 mm (2.5” x 8.9” x 10.7″)
  • Control: Waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
  • Rope type: Galvanized aircraft A7 x 19 wire rope
  • Rope size: 8.7 mm x 30.5 m (11/32” x 100’)
  • Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
  • Mounting : Foot forward or foot down mounting workable
  • Finish : Matte black powder-coated
  • Winch weight (including rope) : 36.2 kg / 79.8 lb
  • Gross weight : 51.3 kg / 113 lb
  • Box dimension, (L x D x H) : 682 x 209 x 430 mm (26.9″ x 8.2″ x 16.9″)

Line Speed and Amp. Draw (1st layer of wire rope on the drum):

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp, Draw,  A
12V
No load
14.5 / 47.6
60
907 / 2,000
4.7 / 15.2
115
1,814 / 4,000
3.5 / 11.5
210
2,722 / 6,000
2.8 / 9.2
245
3,629 / 8,000
2.3 / 7.6
280
4,309 / 9,500
2.1 / 6.8
380

Line Pull and Rope Capacity:

Layer of Rope
Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st
4,309 / 9,500
5.8 / 19.1
2nd
3,472 / 7,655
13.1 / 42.9
3rd
2,908 / 6,410
21.7 / 71.2
4th
2,501 / 5,514
30.5 / 100

Warning
Winches are not to be used for the lifting or moving of persons.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components,
New Seal Gen2 Series winch a  three (3) years warranty for electrical components,
WIRE/SYNTHETIC ROPES ARE NOT INCLUDED UNDER WARRANTY.

Dimension, mm/in:

  • 4 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 90° increments.
Standard Accessories  Option Accessories
  • Roller fairlead
  • Remote control w/5 m (17’) cord
  • Detachable control box
  • Wire rope w/safety hook
  • 1.8 m (6’) 2 gauge battery lead
  • Handsaver strap
  • Winch accessory kit

Seal Gen2 9.5 Operation Manual

2015-07-13

PDF, 0.99 MB

Seal Gen2 9.5s

Seal Gen2 9.5s

  • 12V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations.
  • Heavy duty series wound motor equipped with thermal switch alters when motor over-heating.
  • 16 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 22.5 degree increments.
  • Water-proof remote control with thermometric LED indicator w/5 m cord
  • A 12 strand construction synthetic rope coated to improve abrasion and has no water absorption.
  • Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
  • The U.S. Germany, U.K. France, etc patented mechanical cone brake outside the drum expedites heat dispersion and also makes the winch ideal for use with synthetic rope.
  • Meet SAE J706, CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.
  • Part number: PN 295990
  • Rated line pull: 4,309 kg / 9,500 lb single line
  • Motor: 3,730 w / 5.0 hp 12V series wound
  • Gear ratio : 3-stage planetary 159:1
  • Clutch (freespooling): Rotating ring gear
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 63.5 x 227x 273 mm (2.5” x 8.9” x 10.7″)
  • Control: Waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
  • Rope type: Synthetic rope
  • Rope size: 10 mm x 30.5 m (3/8” x 100’)
  • Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
  • Mounting : Foot forward or foot down mounting workable
  • Finish : Matte black powder-coated
  • Winch weight (including rope) : 28.5 kg / 62.5 lb
  • Gross weight : 40 kg / 88 lb
  • Box dimension, (L x D x H) : 682 x 209 x 430 mm (26.9″ x 8.2″ x 16.9″)

Line Speed and Amp. Draw (1st layer of rope on the drum):

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp, Draw,  A
12V
No load
14.8 / 48.6
60
907 / 2,000
4.8 / 15.7
115
1,814 / 4,000
3.6 / 11.8
210
2,722 / 6,000
2.8 / 9.2
245
3,629 / 8,000
2.3 / 7.6
280
4,309 / 9,500
2.2 / 7.2
380

Line Pull and Rope Capacity:

Layer of Rope
Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st
4,309 / 9,500
5.1 / 16.7
2nd
3,472 / 7,655
11.7 / 38.4
3rd
2,908 / 6,410
19.7 / 64.6
4th
2,501 / 5,514
30.5 / 100

Warning
Winches are not to be used for the lifting or moving of persons.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 10 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components,
New Seal Gen2 Series winch a three (3) years warranty for electrical components,
WIRE/SYNTHETIC ROPES ARE NOT INCLUDED UNDER WARRANTY.

Dimension, mm/in:

  • 16 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 22.5° increments.
Standard Accessories Option Accessories
  • Hawse fairlead
  • Remote control w/5 m (17’) cord
  • Detachable control box
  • Synthetic rope w/sling hook
  • 1.8 m (6’) 2 gauge battery lead
  • Handsaver strap
  • Winch accessory kit

Seal Gen2 9.5s Operation Manual

2015-07-13

PDF, 0.99 MB

Seal Gen2 9.5rs

Seal Gen2 9.5rs

  • 12V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations.
  • Heavy duty series wound motor delivers superior torque output and faster line speed. A motor equipped with a thermal protection switch
  • 16 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 22.5 degree increments.
  • Hardened steel, 3-stage planetary gear train for efficient and reliable operation.
  • Both built-in digital two ways wireless remote control and wired water-proof remote control.
  • A 12 strand construction synthetic rope coated to improve abrasion and has no water absorption.
  • Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch.
  • U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load
  • Part number: PN 295850
  • Rated line pull: 4,309 kg / 9,500 lb single line
  • Motor: 3,730 w / 5.0 hp 12V series wound
  • Gear ratio: 3-stage planetary 159:1
  • Clutch (freespooling): Rotating ring gear
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 63.5 x 227 x 273 mm (2.5” x 8.9” x 10.7″)
  • Control: Both built-in digital signal two ways wireless remote control and waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
  • Rope type: Synthetic rope
  • Rope size: 10 mm x 30.5 m (3/8” x 100’)
  • Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
  • Mounting : Foot forward or foot down mounting workable
  • Finish : Matte black powder-coated
  • Winch weight (including rope) : 28.5 kg / 62.8 lb
  • Gross weight : 40 kg / 88 lb
  • Box dimension, (L x D x H) : 682 x 209 x 430 mm (26.9″ x 8.2″ x 16.9″)

Line Speed and Amp. Draw (1st layer of rope on the drum):

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp, Draw,  A
12V
No load
14.8 / 48.6
60
907 / 2,000
4.8 / 15.7
115
1,814 / 4,000
3.6 / 11.8
210
2,722 / 6,000
2.8 / 9.2
245
3,629 / 8,000
2.3 / 7.6
280
4,309 / 9,500
2.2 / 7.2
380

Line Pull and Rope Capacity:

Layer of Rope
Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st
4,309 / 9,500
5.1 / 16.7
2nd
3,472 / 7,655
11.7 / 38.4
3rd
2,908 / 6,410
19.7 / 64.6
4th
2,501 / 5,514
30.5 / 100

Warning
Winches are not to be used for the lifting or moving of persons.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 10 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components,
New Seal Gen2 Series winch a three (3) years warranty for electrical components,
WIRE/SYNTHETIC ROPES ARE NOT INCLUDED UNDER WARRANTY.

Dimension, mm/in:

  • 16 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 22.5° increments.
Standard Accessories  Option Accessories
  • Hawse fairlead
  • Built-in wireless remote control modules
  • Remote control w/5 m (17’) cord
  • Detachable control box
  • Synthetic rope w/sling hook
  • 1.8 m (6’) 2 gauge battery lead
  • Handsaver strap
  • Winch accessory kit

Seal Gen2 9.5rs Operation Manual

2015-07-13

PDF, 1.01 MB

Seal Gen2 9.5i

Seal Gen2 9.5i

4.3 Tonnes Self-Recovery Winch

  • 12V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations.
  • Heavy duty series wound motor equipped with thermal protection switch alters.
  • 16 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 22.5 degree increments.
  • Water-proof remote control with thermometric LED indicator w/5 m cord
  • Cutout switch activates or deactivates the winch.
  • Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
  • The U.S. Germany, U.K. France, etc patented mechanical cone brake outside the drum expedites heat dispersion. The greater the load, the greater amount of brake that is applied by the mechanism.
  • Meet SAE J706, CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.
  • Part number: PN 295980
  • Rated line pull: 4,309 kg / 9,500 lb single line
  • Motor: 3,730 w / 5.0 hp 12V series wound
  • Gear ratio : 3-stage planetary 159:1
  • Clutch (freespooling): Rotating ring gear
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 63.5 x 227 x 273 mm (2.5” x 8.9” x 10.7″)
  • Control: Waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
  • Rope type: Galvanized aircraft A7 x 19 wire rope
  • Rope size: 8.7 mm x 30.5 m (11/32” x 100’)
  • Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
  • Mounting : Foot forward or foot down mounting workable
  • Finish :  Matte black powder-coated
  • Winch weight (including rope) : 38.5 kg / 85 lb
  • Gross weight : 52.6 kg / 116 lb
  • Box dimension, (L x D x H) : 682 x 209 x 430 mm (26.9″ x 8.2″ x 16.9″)

Line Speed and Amp. Draw (1st layer of wire rope on the drum):

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp, Draw,  A
12V
No load
14.5 / 47.6
60
907 / 2,000
4.7 / 15.2
115
1,814 / 4,000
3.5 / 11.5
210
2,722 / 6,000
2.8 / 9.2
245
3,629 / 8,000
2.3 / 7.6
280
4,309 / 9,500
2.1 / 6.8
380

Line Pull and Rope Capacity:

Layer of Rope
Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st
4,309 / 9,500
5.8 / 19.1
2nd
3,472 / 7,655
13.1 / 42.9
3rd
2,908 / 6,410
21.7 / 71.2
4th
2,501 / 5,514
30.5 / 100

Warning
Winches are not to be used for the lifting or moving of persons.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components,
New Seal Gen2 Series winch a three (3) years warranty for electrical components,
WIRE/SYNTHETIC  ROPES ARE NOT INCLUDED UNDER WARRANTY.

Dimension, mm/in:

  • 4 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 90° increments.
Standard Accessories  Option Accessories
  • Roller fairlead
  • Remote control w/5 m (17’) cord
  • Bridge control box
  • Wire rope w/safety hook
  • 1.8 m (6’) 2 gauge battery lead
  • Handsaver strap
  • Winch accessory kit

Seal Gen2 9.5i Operation Manual

2016-08-17

PDF, 0.28 MB

Seal Gen2 9.5si

Seal Gen2 9.5si

  • 12V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations.
  • Heavy duty series wound motor equipped with thermal switch alters when motor over-heating.
  • 16 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 22.5 degree increments.
  • Water-proof remote control with thermometric LED indicator w/5 m cord.
  • Cutout switch activates and deactivates the winch.
  • A 12 strand construction synthetic rope coated to improve abrasion and has no water absorption.
  • Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
  • The U.S. Germany, U.K. France, etc patented mechanical cone brake outside the drum expedites heat dispersion and also makes the winch ideal for use with synthetic rope.
  • Meet SAE J706, CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.
  • Part number: PN 295880
  • Rated line pull: 4,309 kg / 9,500 lb single line
  • Motor: 3,730 w / 5.0 hp 12V series wound
  • Gear ratio: 3-stage planetary 159:1
  • Clutch (freespooling): Rotating ring gear
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 63.5 x 227 x 273 mm (2.5” x 8.9” x 10.7″)
  • Control: Waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
  • Rope type: Synthetic rope
  • Rope size: 10 mm x 30.5 m (3/8” x 100’)
  • Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
  • Mounting : Foot forward or foot down mounting workable
  • Finish : Matte black powder-coated
  • Winch weight (including rope) : 36.2 kg / 79.8 lb
  • Gross weight : 40.8 kg / 90 lb
  • Box dimension, (L x D x H) : 682 x 209 x 430 mm (26.9″ x 8.2″ x 16.9″)

Line Speed and Amp. Draw (1st layer of rope on the drum):

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp, Draw,  A
12V
No load
14.8 / 48.6
60
907 / 2,000
4.8 / 15.7
115
1,814 / 4,000
3.6 / 11.8
210
2,722 / 6,000
2.8 / 9.2
245
3,629 / 8,000
2.3 / 7.6
280
4,309 / 9,500
2.2 / 7.2
380

Line Pull and Rope Capacity:

Layer of Rope
Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st
4,309 / 9,500
5.1 / 16.7
2nd
3,472 / 7,655
11.7 / 38.4
3rd
2,908 / 6,410
19.7 / 64.6
4th
2,501 / 5,514
30.5 / 100

Warning
Winches are not to be used for the lifting or moving of persons.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 10 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components,
New Seal Gen2 Series winch a three (3) years warranty for electrical components,
WIRE/SYNTHETIC ROPES ARE NOT INCLUDED UNDER WARRANTY.

Dimension, mm/in:

  • 16 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 22.5° increments.
Standard Accessories Option Accessories
  • Hawse fairlead
  • Remote control w/5 m (17’) cord
  • Bridge control box
  • Synthetic rope w/sling hook
  • 1.8 m (6’) 2 gauge battery lead
  • Handsaver strap
  • Winch accessory kit

Seal Gen2 9.5si Operation Manual

2016-08-17

PDF, 0.50 MB

Seal Gen2 9.5rsi

Seal Gen2 9.5rsi

  • 12V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations.
  • Heavy duty series wound motor equipped with thermal protection switch alters.
  • 16 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 22.5 degree increments.
  • Both built-in digital signal two ways wireless remote control and wired water-proof remote control
  • Cutout switch activates or deactivates the winch.
  • A 12 strand construction synthetic rope coated to improve abrasion and has no water absorption.
  • Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
  • The U.S. Germany, U.K. France, etc patented mechanical cone brake outside the drum expedites heat dispersion and also makes the winch ideal for use with synthetic rope.
  • Meet SAE J706, CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.
  • Part number: PN 295860
  • Rated line pull: 4,309 kg / 9,500 lb single line
  • Motor: 3,730 w / 5.0 hp 12V series wound
  • Gear ratio: 3-stage planetary 159:1
  • Clutch (freespooling): Rotating ring gear
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 63.5 x 227 x 273 mm (2.5” x 8.9” x 10.7″)
  • Control: Both built-in digital signal two ways wireless remote control and waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
  • Rope type: Synthetic rope
  • Rope size: 10 mm x 30.5 m (3/8” x 100’)
  • Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
  • Mounting : Foot forward or foot down mounting workable
  • Finish : Matte black powder-coated
  • Winch weight (including rope) : 36.2 kg / 79.8 lb
  • Gross weight : 40.8 kg / 90 lb
  • Box dimension, (L x D x H) : 682 x 209 x 430 mm (26.9″ x 8.2″ x 16.9″)


Line Speed and Amp. Draw (1st layer of rope on the drum):

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp, Draw,  A
12V
No load
14.8 / 48.6
60
907 / 2,000
4.8 / 15.7
115
1,814 / 4,000
3.6 / 11.8
210
2,722 / 6,000
2.8 / 9.2
245
3,629 / 8,000
2.3 / 7.6
280
4,309 / 9,500
2.2 / 7.2
380

Line Pull and Rope Capacity:

Layer of Rope
Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st
4,309 / 9,500
5.1 / 16.7
2nd
3,472 / 7,655
11.7 / 38.4
3rd
2,908 / 6,410
19.7 / 64.6
4th
2,501 / 5,514
30.5 / 100

Warning
Winches are not to be used for the lifting or moving of persons.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 10 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components,
New Seal Gen2 Seies winch a three (3) years warranty for electrical components,
WIRE/SYNTHETIC ROPES ARE NOT INCLUDED UNDER WARRANTY.

Dimension, mm/in:

  • 16 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 22.5° increments.
Standard Accessories  Option Accessories
  • Hawse fairlead
  • Built-in wireless remote control modules
  • Remote control w/5 m (17’) cord
  • Bridge control box
  • Synthetic rope w/sling hook
  • 1.8 m (6’) 2 gauge battery lead
  • Handsaver strap
  • Winch accessory kit

Seal Gen2 9.5rsi Operation Manual

2016-08-17

PDF, 0.27 MB

Seal Gen2 12.5

Seal Gen2 12.5

  • 12V DC severe duty winch rated at 12,500 lb pulling meets or exceeds your expectations.
  • Heavy duty series wound motor equipped with thermal switch alters when motor over-heating.
  • 16 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 22.5 degree increments.
  • Water-proof remote control with thermometric LED indicator w/5 m cord
  • Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
  • The U.S. Germany, U.K. France, etc patented mechanical cone brake outside the drum expedites heat dispersion.The greater the load on the rope, the greater amount of braking is generated by the mechanism.
  • Meet SAE J706, CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.
    (* Only foot forward mounting can meet SAE J706)
  • Part number: PN 295730
  • Rated line pull: 5,670 kg / 12,500 lb single line
  • Motor: 3,730 w / 5.0 hp 12V series wound
  • Gear ratio: 3-stage planetary 225:1
  • Clutch (freespooling): Rotating ring gear
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 63.5 x 227 x 273 mm (2.5” x 8.9” x 10.7″)
  • Control: Waterproof remote with thermometric indicator LED w/ 5 m (17′) cord
  • Rope type: Galvanized aircraft A7 x19 wire rope
  • Rope size: 9.5 mm x 25 m (3/8” x 82’)
  • Mounting bolts pattern: 254 x 114 mm (10” x 4.5”)
  • Mounting: Foot forward mounting only
  • Finish: Matte black powder-coated
  • Winch weight (including rope) : 37.7 kg / 83.1 lb
  • Gross weight : 53 kg / 117 lb
  • Box dimension, (L x D x H) : 682 x 209 x 430 mm (26.9″ x 8.2″ x 16.9″)

Line Speed and Amp. Draw (1st layer of wire rope on the drum):

Line Pull,
kg / lb
Line Speed,
mpm / fpm
Amp, Draw,  A
12V
No load
7.5 / 24.6
45
907 / 2,000
3.4 / 11.2
75
1,814 / 4,000
2.5 / 8.2
160
2,722 / 6,000
2.0 / 6.6
230
3,629 / 8,000
1.6 / 5.2
300
5,670 / 12,500
0.9 / 3.0
470

Line Pull and Rope Capacity:

Layer of Rope
Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st
5,670 / 12,500
5.4 / 17.7
2nd
4,499 / 9,919
12.1 / 39.7
3rd
3,729 / 8,221
20.3 / 66.6
4th
3,184 / 7,020
25.0 / 82.0

Warning
Winches are not to be used for the lifting or moving of persons.
The rated line pull shown is based on the first layer of rope on the drum.
The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components,
New Seal Gen2 Series winch a three (3) years warranty for electrical components,
WIRE/SYNTHETIC ROPES ARE NOT INCLUDED UNDER WARRANTY.

Dimension, mm/in:

  • 16 equally positioned pin holes ensure seamless clutch transmission and make it easily rotate by 22.5° increments.
Standard Accessories  Option Accessories
  • Roller fairlead
  • Remote control w/5 m (17’) cord
  • Detachable control box
  • Wire rope w/safety hook
  • 1.8 m (6’) 2 gauge battery lead
  • Handsaver strap
  • Winch accessory kit

Seal Gen2 12.5 Operation Manual

2015-07-13

PDF, 0.93 MB