Battery Isolation Switch PN 881097 2 Position Off-On 12V 500 Amp for Walrus/DV/Seal Gen2/Cap Series Winch
Emergency Stop Switch, PN 881668 400A
20 mm (3/4″) pin diameter, PN 881092
PN 881083 Front mounting for DV-6 Long. drum, DV-9/9s/9i/9si, Seal Gen2 9.5/9.5s/9.5rs/9.5i/9.5si/9.5rsi
PN 881085 Front mounting for DV-12/15
PN 882264 2″ hitch receiver for DV-6s carry on
PN 881087 204 mm for DV-12/15
PN 882038 184 mm for DV-18
PN 882039 204 mm for Walrus 16.5
PN 882219 254 mm for Walrus 20.0
PN 881082 max. load 13,610 kg / 30,000 lb for DV-12 light/12s light/12/15, Seal Gen2 12.5/12.5s/12.5rs
PN 881079 max. load 10,000 kg / 22,000 lb for DV-6/6s/6s carry on, DV-9/9s/9i/9si, Seal Gen2 9.5/9.5s/9.5rs/9.5i/9.5si/9.5rsi, Cap 9.0s, Blazer, Seal MadX 8.0s
PN 881080 max. load 5,000 kg / 11,000 lb for DV-2500i/3500i/4500i
PN 882218 229 mm throat for Walrus 20.0
PN 880023 210 mm throat for DV-6 Long drum/9/9i/12 light, Seal Gen2 9.5/9.5i/12.5
PN 880066 179 mm throat for DV-12/15/18, Walrus 16.5, Seal Gen2 16.5
PN 880096 109 mm throat for DV-6 Std. drum
PN 880289 63 mm throat for DV-2500i/3500i/4500i
PN 881061 184 mm throat for Seal Gen2 9.5s/9.5rs/9.5si/9.5rsi/12.5s/12.5rs/16.5s/16.5rs, Seal MadX 8.0s, DV-9s/9si/12s light
PN 882152 112 mm throat for Cap 9.0s, DV-6s/6s carry on
PN 882697 264 mm throat for Blazer
PN 883042 82 mm throat for Seal MadX 8.0s SD
PN 883043 183 mm throat for Seal MadX 8.0s MD
PN 883067 184 mm throat for Seal MadX 8.0s LD
PN 881077 (12V) / PN 881078 (24V) for DV-2500i/3500i/4500i
error: Content is protected !!
